Common Mistakes to Avoid While Doing Concrete Core Drilling in Maryland

Working with concrete can be one of the most difficult tasks, which requires patience, experience, and precision than other materials. Moreover, due to the complex nature of concrete, performing concrete coring and cutting may even take more time. And it requires you to avoid certain mistakes which impact the safety of yourself and others.  

Whether you want to service concrete, remove concrete, or need to perform concrete coring, this post will help you with the common mistakes you can avoid and keep working safer and effectively.

Below are the common mistakes people make during concrete core drilling in Maryland.

Thinking All the Concrete Is the Same

The most common mistake which people make is thinking that all concrete is the same when it comes to concrete cutting and drilling. Remember, concrete is made from several additive mixtures that can affect its strengths, density, and other characteristics.

As different mixtures are used, you mustn't treat the concrete types the same way. Treating the concrete the same way might use the wrong tools, especially when doing concrete core drilling. That is where you should know the difference in the concrete so you can use the right tools while drilling.

Not Taking Your Safety into Consideration

Taking not much care of the proper safety precautions for yourself and others may put everyone at risk. Irrespective of how trained you may be, it is obvious that mishaps can happen anywhere. So here is the common safety gear you can consider.

• Steel-capped boots
• Hearing protection
• High visibility clothing
• Respirator
• Safety glasses
• Hard hat

Do not wear loose clothing or jewelry caught by moving parts or machinery.

Not Knowing What Is Under the Concrete

This mistake poses a significant threat to safety. Before you start concrete coring, you should find out if there is anything behind, under, on inside the concrete. For example, the concrete wall might hide the live electrical wires, rebar, or plumbing. Knowing what and where you are going to the core will give you more clarity about the tools and strategies you will use. 

It is recommended to check all the blueprints before you begin the coring project. Here you can also take help from concreting scanning and imaging.

 Drilling Too Fast

While drilling the concrete, you must follow certain speed limits, which are recommended. However, you can always change the speed if you find the abrasiveness and hardness of the concrete increasing. If you tend to drill too fast than the recommended speed, it may hinder the drill from working.

Applying Too Much Pressure

The other mistake people often make applying too much pressure while drilling the concrete. While you can always do this through the concrete, doing this may damage your drill bits and create fractures in the concrete. It likewise speeds up the drilling. You also have to take care of the pressure.

If you think you may make such mistakes, consider getting help from a professional specializing in concrete core drilling. Connect with Concrete Insight, a trusted Concrete Core Drilling company in Maryland. For more information on core drilling, contact us.